Tips When Diagnosing the Cause of a Noisy Garage Door

Posted on

Your garage door has many different components, which means that when it is not functioning properly it is possible for the cause to not always be easy to identify. One of the most common issues with your garage door is often noise. Over time, it is normal for parts to wear and for your door to operate in a way that results in loud squeaky noises being noticeable. This is not only an annoyance, but it can also be a warning sign that parts are more apt to become broken. It is important for you to be aware of what the most common causes of a noisy garage door could potentially be so that you can correct the issue quickly.

Adjusting Screws

One of the most common causes and easiest fixes for a noisy garage door is a small adjustment. It is possible for screws on the door track to become slightly loose over time. If the screws are not tight enough this can result in noise being noticeable when the garage door goes up or down. In most cases, the type of noise that you will hear when your garage door needs to be adjusted is a loud bang. All you need to do is tighten the loose screw on the door track and the loud bang should stop altogether.

Switching Rollers

Another culprit of a noisy garage door could be rollers that are wearing. If you have a garage door that has been used for a number of years, it is likely that the rollers have worn out over time. Since most rollers are made from metal, this can result in a lot of noise being created when they go up and down the track.

If you are looking to cut down on the noise, you can switch out metal rollers for rollers that are made from nylon. This type of roller is ideal because you will not be required to add a lubricant to the surface of the roller as often. When you are replacing the rollers on your garage door to cut back on noise, you need to make sure that you use caution because they are attached to the tension springs.

Checking the Hinge Shape

If your garage door is overly noisy, it is also a good idea to take a look at the shape of the hinge. The shape of the hinge could be a telltale sign of the cause of your noise problems. Hinges on your garage door should be oblong in shape, but over time they become worn and can morph into a shape that is more round. If your hinge is round, it is time for it to be replaced to cut back on the noise that your garage door makes when operating.